Charger XTAR MC2 PLUS 10440/21700

XTAR MC2 Plus Charger for 10440/21700 USB Li-ION IMR/ INR/ ICR 2 channels

The latest innovative charger, the MC2 Plus is an intelligent device for charging various Li-ION cells, protected and unprotected. It has an indicator for each charging channel, showing progress and charging current. In addition, it automatically recognizes the state of the battery, and displays the current information on a small LED display. It can charge, both 1 cell and 2 in Li-ION technology at the same time. It does not support protected battery sizes 20700 and 21700. MC2 Plus is a portable charger, useful for any travel.

What makes the MC2 Plus charger stand out ?

• Three-stage processor-controlled TC/CC/CV charging process

• Two independent charging channels
• Charging indicator for each channel separately
• Compact, small size - easy to carry around
• Automatically selects the most suitable charging current (0.5A / 1A) for batteries to maximize battery life
• Delicate display shows charging current and charging status
• Charge anywhere and anytime using Micro USB charging port
• 0V Reactivation function can save "dead" batteries
• Protections: short circuit, thermal, reverse polarity protection
• Can charge size: 10440/ 14500/ 14650/ 16340/ 17335/ 17500/ 17670/ 18350/ 18490/ 18500/ 18650/ 18700/ 20700/ 21700 at rated voltage of 3.6V/3.7V - Li-ION technology
• Compatible with industrial cells (so called without high plus), low capacity and IMR/ INR/ ICR batteries
• Does not support protected battery sizes 20700 and 21700
• Made of ABS material, excellent heat dissipation
• Warranty: 12 months

The TC/CC/CV charging algorithm used in the charger is a charging process for Li-ION cells to ensure good cell condition. It involves charging with the right current and also completing the charge at the right time. TC/CC/CV charging stages, we can divide into:

• TC stage: the initial phase of checking and reactivating a cell whose voltage has dropped below 2.9V
• CC stage: then the cell is charged with a constant current of 50mA to 500mA (depending on the connected power source).
• CV stage: then the charger switches to charging with decreasing current until the cell voltage reaches 4.2V. When the cell voltage reaches 4.2V, charging is complete and the battery is fully charged

Included with the XTAR MC2 Plus charger, you get a micro USB cable. For the set, you will need a power adapter, such as for your phone, or a computer with a free USB port. The optimal power of the charger should be 2100mA.

An interesting and safe solution in the MC2 Plus charger is a separately connected power supply. This prevents unnecessary heating of the charged cell. When the set is working, the power supply itself heats up and not the charged cell. As a result, the temperature during charging, can increase on the cell no more than 15ºC. This directly affects the life of the battery.

In the MC2 Plus charger, we can also recharge the batteries, up to full. First, we put the battery into the charger and wait until its voltage drops below 4.1V. This will occur during the self-discharge process. Batteries with a voltage of 4.1V or higher are treated as charged by the charger. Charging will start when the voltage drops below 4.1V.

Reactivating discharged cells involves inserting the cell into the charger and checking the voltage. With this function, we can check each cell in the appropriate size. When a discharged cell is detected, the charger will attempt to reactivate it. Note that exceeding the minimum voltage on the cell will limit the possibility of reactivating and saving such a battery.

Technical specifications:

• manufacturer: XTAR
• charger model: MC2 Plus
• supported battery types: 1-2 Li-ion 3.6 - 3.7V batteries, protected and unprotected
• supported battery sizes: 10440/ 14500/ 14650/ 16340/ 17335/ 17500/ 17670/ 18350/ 18490/ 18500/ 18650/ 18700/ 20700 (unsecured only), 21700 (unsecured only)
• maximum battery length: 70mm
• input voltage and current: 5V DC 500mA - 2100mA
• power socket: micro-USB
• recommended power adapter: 5V 2.1A
• charging method: processor-controlled TC/CC/CV
• charging current : 1A x 2/ 0.5A x 2 (depending on the power source used)
• charging termination voltage: 4.2V ±0.05V
• termination current: <40mA
• additional functions: reactivation of deeply discharged cells
• protections: thermal,short-circuit, against reverse battery insertion
• dimensions: 96 x 47 x 26mm
• weight: 48g

Set includes:

• XTAR MC2 Plus charger
• USB charging cable
• Carrying pouch
• User manual

User manual EN
CE certificate of conformity EMC
ROHS hazardous substances quantity directive
FCC communications commission certificate

All XTAR products are sold with a label on the package containing a unique originality code. To check the authenticity of the product, please pay attention to the sticker located on the housing of the device.

Please here, scratch off the layer and write down the unique 18-digit product number.

On the manufacturer's website, enter the 18-digit number in the appropriate fields, available here: http://www.xtar.cc/intro/14.html. After verification, we will know if our device is original and actually manufactured by XTAR.

XTAR AC/5V 2.1A USB Wall Adapter Plug